The installation site of the snow guards is directly above the wall or higher. If installed closer to the eaves, it must be ensured that the structures can carry the weight of the snow.
Fasten the roof fasteners with min. 7x30 screws 10 pcs per fasteners and max. 1,200 fastener spacing. Use at least three fasteners. In tightening screws, be mindful not to let the screw rotate loosely. Feedthroughs must be sealed with sealing strip.
PROFILED SHEET ROOF: The roof fastener is fastened only to the sheet, the location of the batten wood is not significant. If an initial hole is made for the screws, its maximum size is Ø 3.3 mm. In a grooved profiled sheet, do not install the fastener over the groove.
Fit the snow guard pipes in place. Lock the ends and extension bits of the pipes against sliding with M8x35 mm screw and nut. Maximum overhang of the snow guard from the outermost fastener 150 mm.